The Skimlite 9024 and our 26ft Carbon Fiber Pool Pole are both long telescopic options for pool maintenance. The useful comparison is how their reach, adjustment systems and attachment fit match your work. A longer pole can help with access, but two extra feet on a product label do not establish a winner for every pool.
This is a specification-based buying comparison, reviewed in October 2026. It is not a controlled head-to-head test. We sell the PoolPoles carbon fiber model and link to the manufacturer’s information for the competing pole so you can check the exact design.
The verified 9024 specification
Skimlite’s official Dually series listing identifies the 9024 as a three-piece pole with an approximate 8–24ft range. It combines an outside-thread lock with an internal-cam lock. The manufacturer’s Dually parts listing identifies the relevant telescoping-pole construction as aluminum. That dual-lock design should not be described as a generic single external clamp.
Our 26ft Carbon Fiber Pool Pole uses four telescopic sections and three quick-release clamps. It is listed as a 26ft/8m carbon fiber cleaning pole. The connection is intended for standard pool brushes, nets and vacuum heads, subject to checking your exact attachment.
How much does the extra reach matter?
The nominal maximum lengths differ by about two feet. That can matter when an existing 24ft pole falls just short of a routine cleaning area. It may make little difference where a shorter setting already reaches the whole job. Measure from places where you can stand comfortably and account for depth, deck access and the length you need to keep in your hands.
Do not equate maximum extension with usable reach beyond the coping. The working angle, attachment and required section overlap all affect the setup. Moving around the pool can be more practical than holding a fully extended pole from one location, especially with a loaded net.
Dual locks versus quick-release levers
If you already use a Dually, consider whether you like its two locking mechanisms and adjustment routine. Our pole offers lever-operated clamps instead. These are different ways to hold telescopic sections; neither description establishes that a system will never slip, jam or need service.
For either pole, check that the sections move as intended and remain secure after adjustment. Inspect for wear and grit, follow the manufacturer’s adjustment instructions and replace compatible parts as needed. Do not overtighten a lock to conceal damage elsewhere in the assembly.
Compare handling without guessing at performance
A fair handling comparison uses the same tool at the same working length. An empty skimmer at short extension is not equivalent to a full leaf rake at maximum reach. Check published complete-pole weights where available, then consider balance with your actual attachment.
This guide does not provide a standardized weight, deflection or breaking-load comparison between these exact two products. Claims such as “exponentially stiffer,” “zero flex” or “half the weight” would require measurements that this guide does not provide. Do not use either pole as a pry bar or a lifting device.
Before replacing a serviceable 9024
- Confirm that more reach would solve a recurring problem rather than an occasional inconvenience.
- Check the net, brush and vacuum-head fitting against the new pole specification.
- Compare collapsed length and transport arrangements, not just extended length.
- Check availability of model-specific repair parts and read the current warranty and return terms.
- Inspect your existing pole: a compatible service part may solve a lock problem without requiring a whole new pole.
Which should you choose?
A sound 9024 can remain a reasonable choice if its reach and locking system suit you. Our carbon fiber pole is worth a closer look if you want nominal 26ft reach, a four-section design and quick-release lever adjustments. Buy on those verified features rather than on unsupported claims that every aluminum pole will fail.
For regular maintenance, use the shortest practical extension, avoid overloaded nets and check for overhead electrical hazards. Carbon fiber is conductive and is not insulating safety equipment. Check the live product page for the current price and included items before ordering.
Our current Blackout Pro option
For our current all-black option, see the Blackout Pro 26ft (8m) Carbon Fiber Pool Pole. It has matte-black 3K carbon fiber, four telescopic sections, three all-black quick-release locks, a textured grip and a 16-hole metal tool connector. The standard pole pictured within this article is a different version. Check the Blackout Pro listing for current details and confirm your attachment fit before ordering.